Tuesday, October 20, 2015

Review INCRA MITEREXPRESS Miter Express, Fantastic Sled, Poor Color Choice

Posted by  on 

A yesterday. I search for information on the INCRA MITEREXPRESS Miter Express, so i would like to describe here.


I just love tuned instruments well well done-and this is one of them. I used the slide for several projects since I purchased it and I find it very accurate and easy to configure. I recently did some cabinet doors and made a big difference in how everything fit together. I was using a Dewalt 12 sliding Miter "to cut the rails and stiles. being out only 1/32 is very evident and the miter saw not only aligns so easily. the slide comes equipped on the left installion




INCRA MITEREXPRESS Miter Express





Micro Jig ZP9-B2S2 Zeroplay Guide Bar System Double Pack, Almost great... in my opinion

Posted by  on 

The few days before. I search for information on the Micro Jig ZP9-B2S2 Zeroplay Guide Bar System Double Pack, so i would like to describe here.


mitre sliders best on the market. I'm using these with incra build-it. I was using mitre cursors, however, there was not too much play (Wobble), or were too tight to move. Micro Jig cursors Zeroplay are easy to install and calibrate. for installation I used a 1/4 drill where sliders, then I used some 1/2 for flare. If you are uncomfortable with this, use scrap before. Once you have the correct depth on 1/2




Micro Jig ZP9-B2S2 Zeroplay Guide Bar





Review Kreg KMS7102 Table Saw Precision, Great, but be aware of using with Compact Saws

Posted by  on 

A previous week. I search for information on the Kreg KMS7102 Table Saw Precision Miter Gauge System, so i would like to describe here.


This is an excellent tool. my happiness is that it is easy to set up and use the slot to the right on the table. is dead accurate--I didn't have to change anything to make cuts absolutely square feet. ANYWAY ... --I would be much happier if the scrollbar was aluminum instead of steel. the aluminium bar bends very. plastic adjusters must be adjusted exactly right or the bar will flex, by slightly changing the angle of cutting-. I am a Carpenter and sometimes




Kreg KMS7102 Table Saw Precision Miter





Review Kreg KMS7303 30-Inch Jig and Fixture Bar, Good product; somewhat fussy

Posted by  on 

A few days before. I search for information on the Kreg KMS7303 30-Inch Jig and Fixture Bar, so i have to tell.


I liked many things about these bars. compared to Incra, bar are superior in many ways. There is one thing I don't like about these bars and that is the mounting holes countersinked. I would have preferred a flat bottom hole, so that there would be no danger of ScrollBar in one way or the other when the screw is tightened. I found the Kreg ways bar to be more desirable than Incras: the bars are not trapezoidal as well 24 sliders, Incra "so that they can




Kreg KMS7303 30-Inch Jig and Fixture Bar